Tablet Prompter Instructions

Insert 2 of the 15mm bars into the 2 holes on the Tripod plate and secure using the levers on both sides. The bars will need to protrude out of the back of the holes slightly in order to attach the camera plate.

Attach the supplied Camera Plate to the underside of your camera, using the supplied screw. (alternative sized screw also supplied in kit) The holed lip of the camera plate should be at the back of your camera and pointing down towards the floor.

Slide the camera plate with the attached camera, on to the back end of the 15mm bars and secure using the levers on both sides. (Please note, longer lenses are not suitable for this rig due to the length of the bars)

Putting to one side the blue cloth bag containing the spare glass, slide the Hood and attached Glass on to the exposed end of the 15mm bars using the higher set of holes on the back of the hood and secure using the knobs on both sides.

The height of the glass can be adjusted by loosening the knob on the front of the hood and sliding the frame up and down, remembering to secure in place using the same knob when finished.

Pull the string to tighten the cloth hood around the lens.

Insert the remaining 2x15mm bars into the front 2 holes of the hood and glass, and secure using the knobs on each side.

Slide the Tablet Clamp on to the 15mm bars and secure using the levers at both side. The adjustable lip should be facing upwards and inwards.

Place the Ipad on to the 15mm bars and adjust the Tablet Clamp accordingly to secure in place. 

If you have chosen to use a Cuebox supplied Ipad and app, plug the i-glue (f) and i-scroller (g) into the Ipad. 

You are now ready to prompt.